SENSORS

Ponsel PHEHT pH digital sensor with cartridge

The PHEH digital pH, ORP and temperature sensor has been designed to perform under the harshest of conditions from pure mountains water with conductivity as low as 20 μS/cm, lakes and rivers (100 – 2000 μS/cm), seawater with conductivities of 50 mS/cm to wastewater with conductivity higher than 200 mS/cm. The PHEH sensor features a “long life” reference. The Plastogel® PONSEL technology. This increases the lifetime of the probe, along with the need to refill. The probe has been designed to operate with the Odeon handheld, as well as in situ applications which have typically been the most difficult situations for a pH/ORP sensor in terms of the sensors resistance, response time, minimal flow dependence and low power consumption.

Sensor Type and Cable Length:

• Ponsel PHEHT pH digital sensor bare wire 7m without cartridge
• Ponsel PHEHT pH digital sensor 3m / 7m for ODEON without cartridge
• Ponsel PHEHT pH digital sensor 3m / 7m for LOG_AQUA without cartridge

Ponsel NTU Turbidity digital sensor

The NTU turbidity sensor is based on IR nephelometry technology (850nm). The NTU can be easily calibrated using a formazin turbidity standard, the sensor is auto ranging and can offer measurements up to 4000 NTU. The sensor incorporates a low cost optical technology which requires low maintenance and requires no consumables.

Sensor Type and Cable Length:

• Ponsel NTU Turbidity digital sensor bare wire 7m
• Ponsel NTU Turbidity digital sensor 3m / 7m for ODEON
• Ponsel NTU Turbidity digital sensor 3m / 7m for LOG_AQUA

Ponsel OPTOD Oxygen Optical digital sensor bare wire

The OPTOD (Optical Dissolved Oxygen technology) sensor is based on luminescent optical technology. The OPTOD is offered with ASTM International Method D888-05 approval. Without regular calibration requirements and ultra-low power technology, the OPTOD sensor meets the demands of field works, and is suited to both short and long term campaigns. Without oxygen consuming oxygen during measurement, the technology allows you an accurate measure in all situation and especially in very low oxygen concentrations.

Body in Stainless steel (316L) or Titanium

Sensor Type and Titanium Option and Cable Length:

• Ponsel OPTOD Oxygen Optical digital sensor bare wire 3m / 7m
• Ponsel OPTOD Oxygen Optical digital sensor 3m / 7m for ODEON
• Ponsel OPTOD Oxygen Optical digital sensor 3m / 7m for LOG_AQUA
• Ponsel OPTOD Oxygen Optical digital sensor Titanium 7m bare wire
• Ponsel OPTOD Oxygen Optical digital sensor Titanium 3m / 7m for ODEON
• Ponsel OPTOD Oxygen Optical digital sensor Titanium 3m / 7m for LOG_AQUA

Ponsel ORP digital sensor bare wire EHAN with cartridge

The PONSEL sensor incorporates a reference electrode, used for ORP measurements, such as Ag /
AgCl in saturated KCl electrolyte plasticized “PLASTOGEL” ®.
The electrolyte “PLASTOGEL” ® communicates directly with the external environment without
interposition of capillary or porous. So there is no risk of clogging or defusing the reference.
The measuring electrode is in platinum (3,5mm2) presented in sealed ring on a glass rod and is for insitu measurements continuously.

Sensor Type and Cable Length:

• Ponsel ORP digital sensor 7m / 15m bare wire EHAN without cartridge
• Ponsel ORP digital sensor 3m / 7m bare wire EHAN for ODEON without cartridge
• Ponsel ORP digital sensor 3m / 7m bare wire EHAN for LOG_AQUA without cartridge

Ponsel LoRa Module AquaMod’  Antenna

AquaMod ‘communicating module via LoRa protocol (EUROPE Version), for digital sensor. Autonomy 2 years. SMS alert and mails. Transfer and hosting of secure data. Local and independent radio communication network. Real-time visualization of data.

Sensor Type:

• Ponsel LoRa Module AquaMod’ – Internal Antenna EU868 (Europe)
• Ponsel LoRa Module AquaMod’ – External Antenna EU868 (Europe)
• Ponsel LoRa Module AquaMod’ Internal Antenna US915 (US)
• Ponsel LoRa module AquaMod’ – External Antenna US915 (US)

Ponsel Hydroclean Anti-fouling system

The HYDROCLEAN-_P is a mechanical wiper system designed to fit easily to the numerical sensor of Turbidity NTU & Oxygen OPTOD.
Using a regular gentle brushing action, the HYDROCLEAN_P keeps the optical window of the instrument clean from bio-fouling and other unwanted deposits such as mud. Two versions of the Hydroclean_P are available. A battery powered with 2 x lithium batteries (offering 4 months life on a 120 minute brush frequency) and externally powered version which can accept a supply of 5-24vdc offering great flexibility across a variety of applications.

Sensor Type and Cable Length:

• Ponsel HydroClean_P autonomous version for sensor NTU on 7m / 15m
• Ponsel HydroClean_P autonomous version for sensor OPTOD on 7m / 15m
• Ponsel HydroClean_PEx to integrate for sensor NTU on 7m / 15m
• Ponsel HydroClean_PEx to integrate for sensor OPTOD on 7m / 15m

Ponsel CTZN Inductive Conductivity digital sensor bare wire

A ring-type coil is excited at fixed intervals and the response is retrieved on a second coil, which is linked to the excited coil. The connectivity between the coils (determined by the degree of conductivity) takes place via the conducting solution.
Economic and successful technology that requiring not enough maintenance and not consumable.

Sensor Type and Cable Length:

• Ponsel CTZN Inductive Conductivity digital sensor 7m /15m bare wire
• Ponsel CTZN Inductive Conductivity sensor 7m / 15m bare wire in pipe stainless

ponsel TRIPOD Multiparameter probe Oxygen/Cond/Turbidity bare wire

The new numerical TRIPOD of PONSEL MESURE allows to measure until 8 physico-chemical parameters in the same time dedicated to the quality of water among the following ones: pH, ORP, Temperature, DO (by optical way), turbidity ( NTU / FNU), Turbidity ( mg / L ), conductivity, salinity, TDS..

• Ponsel TRIPOD Multiparameter probe Oxygen/Cond/Turbidity 7m / 15m bare wire
• Ponsel TRIPOD Multiparameter probe Oxygen/pH/Conductivity 3m bare wire
• Ponsel TRIPOD Multiparameter probe Oxygen/pH/Turbidity 3m / 7m bare wire
• Ponsel TRIPOD-ODEON Multiparameter probe Oxygen/Cond/Turbidity 7m
• Ponsel TRIPOD-ODEON Multiparameter probe Oxygen/pH/Conductivity 7m / 15m 
• Ponsel TRIPOD-ODEON Multiparameter probe Oxygen/pH/Turbidity 3m / 7m

ORCHIDIS Sensor of detection of the fouling SKIDSENS with mounting T

The sensor continuously monitors the fouling trend
within the water process enabling the optimization of
treatments and confirmation of treatments
effectiveness.
The Skidsens probe can be mounted onto a by-pass
monitoring system and/or controller system.

Ponsel VB5 Sludge blanket digital sensor bare wire

The principle of measure is based on the mitigation of the Infra-Red signal in 870 nm through an optical path of 5mm. The sensor delivers measures in Suspended Solid (g/l), Turbidity (FAU) and Sludge Blanket detection in % of transmission IR. For a better precision, the optics of the sensor are regulated in temperature. For a measure of Suspended Solid, the sensor is directly calibrated on the material to be measured (sample of
sludge).

Sensor Type and Cable Length:

• Ponsel VB5 Sludge blanket digital sensor 7m / 15m bare wire
• Ponsel VB5 Sludge blanket digital sensor 3m / 7m for ODEON
• Ponsel MES5 Suspended Solid digital sensor 7m / 15m bare wire
• Ponsel MES5 Suspended Solid digital sensor 3m / 7m for ODEON
• Ponsel MES5 Suspended Solid digital sensor 3m / 7m for LOG_AQUA